Clortex® 10
Chlorinated Rubber 10

Catalog Number	Q009
Definition	CLORTEX® is a chemically inert material with excellent film forming properties. It is a nonflammable, nontoxic, tasteless white powder. A fast physically drying binder. It has extremely low chemical reactivity and can be freely dissolved in solvents. An elastomer (natural rubber or a polyolefin) to which 65% of chlorine has been added to give a solid, film-forming resin. Compatible with almost all natural and synthetic resins.
CAS Number	9006-03-5
Application	CLORTEX® can be used extensively in an expanding range of applications. It can be used to formulate fast drying anticorrosion coating with good weather stability and resistance to water and chemicals. Additionally, it is used for the manufacture of different kinds of paints like anticorrosive, marine, traffic, fire retardant and intumescent, swimming pools. CLORTEX® also has applications in the manufacture of adhesives. In general, low viscosity grades are used in printing inks and spray paints, when low viscosity solutions are required with maximum solid content. Whereas grade 20 is a general purpose grade. Higher viscosity grades are used in special purpose adhesives and textile coatings.
Technical Data	Appearance  White powder  Chlorine content  61 - 65 %  Apparent density  0.40 - 0.65  Viscosity (20% toluene solution at 25°C)  Type 10  Carbon Tetrachloride content  Less than 1%
Packaging & Handling	20 Kgs paper-polyethylene bags. When stored under the proper conditions, CLORTEX® will remain stable for at least 6 months.
Remarks	Do not dry-mill chlorinated rubber with zinc oxide. This mixture reacts violently at 216 °C. Do not used in baked enamels CLORTEX® is a registered trademark of Industrie Chimiche Caffaro SpA.

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for test results obtained by the application of this information or the safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own test to determine the safety and suitability of each product or product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products, whether used alone or in combination with other products.